Fishing Reel Parts. Round and T Bar Reel Handles, Round and T Bar Reel Knobs for most fishing reels including Shimano, Penn, Daiwa and Abu Garcia.

Installation Notes - Round Knobs

First, remove the Philips head screw from the bottom of the knob.

Keep the large washer on the internal knob pin as the washer is positioned between the knob and the handle blank; not between the knob and the Philips head screw.

To attach the knob to the handle blank, you must unscrew the two halves of the knob.

Place a normal screw driver into the bottom half of the knob and use the screw driver to push the internal screw past the bottom of the knob.

Place a small amount of Loctite 242 Blue(medium strength) into the opening of the internal screw.

Attach the Philips head screw thru the handle blank into the knob.

With the normal screw driver inserted into the bottom of the knob to prevent rotation, tighten the Philips head screw. If the knob seems loosely attached to the handle blank, you should tighten the internal screw while keeping the external Philips heads from rotating with the use of the Philips head screw driver.

Installation Notes: Round Knobs | T-Bar Knobs