HANDLE BLANK IS NOT INCLUDED!
These knobs can be used with both conventional and spinning reels. However, extra care should be used when considering use with small spinning reels as the handle blank must have enough "meat" to support the knob's 6.5mm pin.
Please keep in mind that the Power Knob must be attached to your existing reel handle. A handle blank is NOT included in this purchase. However, if you prefer to purchase a complete Power Handle assembly, I have handle blanks for many of the most popular reels. I am offering these complete handles on eBay.
1. All Knobs are made with 6061 Aluminum.
2. JUMBO T-Bars have an 18 degree off-set and contain a ball bearing in the stem.
3. The knob weighs about 4oz. and is about 4.25" in length.
To attach the knob to the original Penn handle blank:
With a Phillips screw driver, remove the original Penn knob from the handle blank. The knob shaft is detached from the knob by removing the small allen screw from inside the knob. Then separate the knob from the shaft. Remove the small plug from the top of the shaft. This will expose a slot in the pin for the second screw driver. Attach the shaft to the original Penn handle blank using 2 screw drivers. The thin washer MUST be placed next to the shaft and the handle blank and NOT next to the Phillips head screw. You should use blue Loctite 242 when attaching the knob shaft to the handle blank to secure the screw. Then reverse the procedure to reassemble.
Mounting Screws May Be LEFT HANDED!
If Needed, Installation Notes Available Upon Request
Sales Tax: CA Residents Pay 9.25% Sales Tax.
Local Pickup: Local pick-up can be arranged.
Payment: Payment is by PayPal only. Please make your payment without receiving an invoice as the shipping process is keyed on and commences with the receipt of your PayPal payment. If you purchase several items, you may request an invoice prior to payment.
Feedback: Feedback will gladly be left upon receipt of your feedback